Limitations of Meshcam, don’t allow cut along a line. Not sure if it’ll work with fanfrets, gonna have to dig deeper on this one. He uploaded his code also, so I can see it’ll work for on multiscale. Ran it in camotics also. G18 changes the plane to along XZ. It has an arc in the cut, and cuts straight no weird pocketing moves that would enlarge the slot. Maybe combine this with the ramping from easel pro, might be a lot, but i’ll try. Multiple people had issues doing this in meshcam. Not sure if making a pocket that small will cut cleanly.
Info on commands
http://www.manufacturinget.org/2011/12/cnc-g-code-g02-and-g03/
https://marlinfw.org/docs/gcode/G002-G003.html
https://cnctips.wordpress.com/2010/06/26/nc-programming-arc-centers/
Doug’s gcode file and notes
https://www.stepcraft-systems.com/en/forum/milling/5103-cutting-0-6-mm-slots-in-a-guitar-fretboard-with-g18-g02-g03-arc-commands#52169
“I have started a new post on this topic rather than append it to my guitar build thread because I feel it will be of wider interest. Last night I successfully managed to cut 1.5 mm deep, 0.6 mm wide pure arc slots for the frets in a guitar fretboard I am making using the G18 (arc in XZ plane) command in conjunction with the G02 and G03 CW & CCW arc commands.
I wrote the GCode for this myself. The YouTube video below (filmed with my iPhone, hand held) illustrates the process. I used a 0.6 mm diameter, Kyocera solid carbide two flute end mill cutting in 0.25 mm depths per pass. The system parameters were extremely conservative to avoid breaking the fragile end mill. Spindle speed 10,000 rpm, XY feed rate 600 mm/min, Z plunge rate 120 mm/min but all Z movements were done outside the line of the stock. This is a test/validation cut on spruce tonewood. The final cuts will be done on European oak.” -Doug
% (FILENAME: Fret Slotting Toolpath G18 XZ Arcs.nc) (STOCK/BLOCK, 100.000, 500.000, 6.350, 50.000, 250.000, 6.350) (TOOL/MILL,0.6000,3.00000,38.000,0.0) G00 X0.0000 Y0.0000 Z2.0000 (Zero Fret) G00 X-26.5000 Y230.9687 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y230.9687 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y230.9687 Z-2.4167 G18 F600 G02 X-26.5000 Y230.9687 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y230.9687 Z-2.6667 G18 F600 G03 X26.5000 Y230.9687 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y230.9687 Z-2.9167 G18 F600 G02 X-26.5000 Y230.9687 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y230.9687 Z-3.1667 G18 F600 G03 X26.5000 Y230.9687 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y230.9687 Z-3.4167 G18 F600 G02 X-26.5000 Y230.9687 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y230.9687 Z-3.6667 G18 F600 G03 X26.5000 Y230.9687 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 1) G00 X-26.5000 Y196.7547 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y196.7547 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y196.7547 Z-2.4167 G18 F600 G02 X-26.5000 Y196.7547 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y196.7547 Z-2.6667 G18 F600 G03 X26.5000 Y196.7547 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y196.7547 Z-2.9167 G18 F600 G02 X-26.5000 Y196.7547 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y196.7547 Z-3.1667 G18 F600 G03 X26.5000 Y196.7547 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y196.7547 Z-3.4167 G18 F600 G02 X-26.5000 Y196.7547 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y196.7547 Z-3.6667 G18 F600 G03 X26.5000 Y196.7547 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 2) G00 X-26.5000 Y164.4607 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y164.4607 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y164.4607 Z-2.4167 G18 F600 G02 X-26.5000 Y164.4607 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y164.4607 Z-2.6667 G18 F600 G03 X26.5000 Y164.4607 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y164.4607 Z-2.9167 G18 F600 G02 X-26.5000 Y164.4607 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y164.4607 Z-3.1667 G18 F600 G03 X26.5000 Y164.4607 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y164.4607 Z-3.4167 G18 F600 G02 X-26.5000 Y164.4607 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y164.4607 Z-3.6667 G18 F600 G03 X26.5000 Y164.4607 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 3) G00 X-26.5000 Y133.9787 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y133.9787 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y133.9787 Z-2.4167 G18 F600 G02 X-26.5000 Y133.9787 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y133.9787 Z-2.6667 G18 F600 G03 X26.5000 Y133.9787 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y133.9787 Z-2.9167 G18 F600 G02 X-26.5000 Y133.9787 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y133.9787 Z-3.1667 G18 F600 G03 X26.5000 Y133.9787 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y133.9787 Z-3.4167 G18 F600 G02 X-26.5000 Y133.9787 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y133.9787 Z-3.6667 G18 F600 G03 X26.5000 Y133.9787 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 4) G00 X-26.5000 Y105.2087 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y105.2087 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y105.2087 Z-2.4167 G18 F600 G02 X-26.5000 Y105.2087 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y105.2087 Z-2.6667 G18 F600 G03 X26.5000 Y105.2087 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y105.2087 Z-2.9167 G18 F600 G02 X-26.5000 Y105.2087 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y105.2087 Z-3.1667 G18 F600 G03 X26.5000 Y105.2087 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y105.2087 Z-3.4167 G18 F600 G02 X-26.5000 Y105.2087 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y105.2087 Z-3.6667 G18 F600 G03 X26.5000 Y105.2087 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 5) G00 X-26.5000 Y78.0527 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y78.0527 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y78.0527 Z-2.4167 G18 F600 G02 X-26.5000 Y78.0527 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y78.0527 Z-2.6667 G18 F600 G03 X26.5000 Y78.0527 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y78.0527 Z-2.9167 G18 F600 G02 X-26.5000 Y78.0527 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y78.0527 Z-3.1667 G18 F600 G03 X26.5000 Y78.0527 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y78.0527 Z-3.4167 G18 F600 G02 X-26.5000 Y78.0527 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y78.0527 Z-3.6667 G18 F600 G03 X26.5000 Y78.0527 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 6) G00 X-26.5000 Y52.4207 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y52.4207 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y52.4207 Z-2.4167 G18 F600 G02 X-26.5000 Y52.4207 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y52.4207 Z-2.6667 G18 F600 G03 X26.5000 Y52.4207 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y52.4207 Z-2.9167 G18 F600 G02 X-26.5000 Y52.4207 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y52.4207 Z-3.1667 G18 F600 G03 X26.5000 Y52.4207 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y52.4207 Z-3.4167 G18 F600 G02 X-26.5000 Y52.4207 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y52.4207 Z-3.6667 G18 F600 G03 X26.5000 Y52.4207 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 7) G00 X-26.5000 Y28.2277 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y28.2277 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y28.2277 Z-2.4167 G18 F600 G02 X-26.5000 Y28.2277 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y28.2277 Z-2.6667 G18 F600 G03 X26.5000 Y28.2277 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y28.2277 Z-2.9167 G18 F600 G02 X-26.5000 Y28.2277 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y28.2277 Z-3.1667 G18 F600 G03 X26.5000 Y28.2277 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y28.2277 Z-3.4167 G18 F600 G02 X-26.5000 Y28.2277 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y28.2277 Z-3.6667 G18 F600 G03 X26.5000 Y28.2277 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 8) G00 X-26.5000 Y5.3927 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y5.3927 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y5.3927 Z-2.4167 G18 F600 G02 X-26.5000 Y5.3927 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y5.3927 Z-2.6667 G18 F600 G03 X26.5000 Y5.3927 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y5.3927 Z-2.9167 G18 F600 G02 X-26.5000 Y5.3927 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y5.3927 Z-3.1667 G18 F600 G03 X26.5000 Y5.3927 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y5.3927 Z-3.4167 G18 F600 G02 X-26.5000 Y5.3927 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y5.3927 Z-3.6667 G18 F600 G03 X26.5000 Y5.3927 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 9) G00 X-26.5000 Y-16.1613 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-16.1613 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-16.1613 Z-2.4167 G18 F600 G02 X-26.5000 Y-16.1613 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-16.1613 Z-2.6667 G18 F600 G03 X26.5000 Y-16.1613 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-16.1613 Z-2.9167 G18 F600 G02 X-26.5000 Y-16.1613 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-16.1613 Z-3.1667 G18 F600 G03 X26.5000 Y-16.1613 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-16.1613 Z-3.4167 G18 F600 G02 X-26.5000 Y-16.1613 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-16.1613 Z-3.6667 G18 F600 G03 X26.5000 Y-16.1613 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 10) G00 X-26.5000 Y-36.5053 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-36.5053 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-36.5053 Z-2.4167 G18 F600 G02 X-26.5000 Y-36.5053 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-36.5053 Z-2.6667 G18 F600 G03 X26.5000 Y-36.5053 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-36.5053 Z-2.9167 G18 F600 G02 X-26.5000 Y-36.5053 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-36.5053 Z-3.1667 G18 F600 G03 X26.5000 Y-36.5053 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-36.5053 Z-3.4167 G18 F600 G02 X-26.5000 Y-36.5053 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-36.5053 Z-3.6667 G18 F600 G03 X26.5000 Y-36.5053 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 11) G00 X-26.5000 Y-55.7073 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-55.7073 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-55.7073 Z-2.4167 G18 F600 G02 X-26.5000 Y-55.7073 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-55.7073 Z-2.6667 G18 F600 G03 X26.5000 Y-55.7073 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-55.7073 Z-2.9167 G18 F600 G02 X-26.5000 Y-55.7073 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-55.7073 Z-3.1667 G18 F600 G03 X26.5000 Y-55.7073 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-55.7073 Z-3.4167 G18 F600 G02 X-26.5000 Y-55.7073 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-55.7073 Z-3.6667 G18 F600 G03 X26.5000 Y-55.7073 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 12) G00 X-26.5000 Y-73.8313 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-73.8313 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-73.8313 Z-2.4167 G18 F600 G02 X-26.5000 Y-73.8313 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-73.8313 Z-2.6667 G18 F600 G03 X26.5000 Y-73.8313 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-73.8313 Z-2.9167 G18 F600 G02 X-26.5000 Y-73.8313 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-73.8313 Z-3.1667 G18 F600 G03 X26.5000 Y-73.8313 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-73.8313 Z-3.4167 G18 F600 G02 X-26.5000 Y-73.8313 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-73.8313 Z-3.6667 G18 F600 G03 X26.5000 Y-73.8313 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 13) G00 X-26.5000 Y-90.9383 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-90.9383 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-90.9383 Z-2.4167 G18 F600 G02 X-26.5000 Y-90.9383 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-90.9383 Z-2.6667 G18 F600 G03 X26.5000 Y-90.9383 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-90.9383 Z-2.9167 G18 F600 G02 X-26.5000 Y-90.9383 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-90.9383 Z-3.1667 G18 F600 G03 X26.5000 Y-90.9383 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-90.9383 Z-3.4167 G18 F600 G02 X-26.5000 Y-90.9383 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-90.9383 Z-3.6667 G18 F600 G03 X26.5000 Y-90.9383 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 14) G00 X-26.5000 Y-107.0853 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-107.0853 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-107.0853 Z-2.4167 G18 F600 G02 X-26.5000 Y-107.0853 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-107.0853 Z-2.6667 G18 F600 G03 X26.5000 Y-107.0853 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-107.0853 Z-2.9167 G18 F600 G02 X-26.5000 Y-107.0853 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-107.0853 Z-3.1667 G18 F600 G03 X26.5000 Y-107.0853 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-107.0853 Z-3.4167 G18 F600 G02 X-26.5000 Y-107.0853 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-107.0853 Z-3.6667 G18 F600 G03 X26.5000 Y-107.0853 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 15) G00 X-26.5000 Y-122.3263 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-122.3263 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-122.3263 Z-2.4167 G18 F600 G02 X-26.5000 Y-122.3263 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-122.3263 Z-2.6667 G18 F600 G03 X26.5000 Y-122.3263 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-122.3263 Z-2.9167 G18 F600 G02 X-26.5000 Y-122.3263 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-122.3263 Z-3.1667 G18 F600 G03 X26.5000 Y-122.3263 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-122.3263 Z-3.4167 G18 F600 G02 X-26.5000 Y-122.3263 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-122.3263 Z-3.6667 G18 F600 G03 X26.5000 Y-122.3263 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 16) G00 X-26.5000 Y-136.7113 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-136.7113 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-136.7113 Z-2.4167 G18 F600 G02 X-26.5000 Y-136.7113 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-136.7113 Z-2.6667 G18 F600 G03 X26.5000 Y-136.7113 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-136.7113 Z-2.9167 G18 F600 G02 X-26.5000 Y-136.7113 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-136.7113 Z-3.1667 G18 F600 G03 X26.5000 Y-136.7113 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-136.7113 Z-3.4167 G18 F600 G02 X-26.5000 Y-136.7113 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-136.7113 Z-3.6667 G18 F600 G03 X26.5000 Y-136.7113 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 17) G00 X-26.5000 Y-150.2893 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-150.2893 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-150.2893 Z-2.4167 G18 F600 G02 X-26.5000 Y-150.2893 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-150.2893 Z-2.6667 G18 F600 G03 X26.5000 Y-150.2893 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-150.2893 Z-2.9167 G18 F600 G02 X-26.5000 Y-150.2893 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-150.2893 Z-3.1667 G18 F600 G03 X26.5000 Y-150.2893 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-150.2893 Z-3.4167 G18 F600 G02 X-26.5000 Y-150.2893 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-150.2893 Z-3.6667 G18 F600 G03 X26.5000 Y-150.2893 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 18) G00 X-26.5000 Y-163.1053 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-163.1053 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-163.1053 Z-2.4167 G18 F600 G02 X-26.5000 Y-163.1053 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-163.1053 Z-2.6667 G18 F600 G03 X26.5000 Y-163.1053 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-163.1053 Z-2.9167 G18 F600 G02 X-26.5000 Y-163.1053 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-163.1053 Z-3.1667 G18 F600 G03 X26.5000 Y-163.1053 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-163.1053 Z-3.4167 G18 F600 G02 X-26.5000 Y-163.1053 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-163.1053 Z-3.6667 G18 F600 G03 X26.5000 Y-163.1053 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 19) G00 X-26.5000 Y-175.2013 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-175.2013 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-175.2013 Z-2.4167 G18 F600 G02 X-26.5000 Y-175.2013 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-175.2013 Z-2.6667 G18 F600 G03 X26.5000 Y-175.2013 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-175.2013 Z-2.9167 G18 F600 G02 X-26.5000 Y-175.2013 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-175.2013 Z-3.1667 G18 F600 G03 X26.5000 Y-175.2013 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-175.2013 Z-3.4167 G18 F600 G02 X-26.5000 Y-175.2013 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-175.2013 Z-3.6667 G18 F600 G03 X26.5000 Y-175.2013 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 20) G00 X-26.5000 Y-186.6193 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-186.6193 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-186.6193 Z-2.4167 G18 F600 G02 X-26.5000 Y-186.6193 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-186.6193 Z-2.6667 G18 F600 G03 X26.5000 Y-186.6193 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-186.6193 Z-2.9167 G18 F600 G02 X-26.5000 Y-186.6193 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-186.6193 Z-3.1667 G18 F600 G03 X26.5000 Y-186.6193 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-186.6193 Z-3.4167 G18 F600 G02 X-26.5000 Y-186.6193 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-186.6193 Z-3.6667 G18 F600 G03 X26.5000 Y-186.6193 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 21) G00 X-26.5000 Y-197.3963 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-197.3963 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-197.3963 Z-2.4167 G18 F600 G02 X-26.5000 Y-197.3963 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-197.3963 Z-2.6667 G18 F600 G03 X26.5000 Y-197.3963 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-197.3963 Z-2.9167 G18 F600 G02 X-26.5000 Y-197.3963 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-197.3963 Z-3.1667 G18 F600 G03 X26.5000 Y-197.3963 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-197.3963 Z-3.4167 G18 F600 G02 X-26.5000 Y-197.3963 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-197.3963 Z-3.6667 G18 F600 G03 X26.5000 Y-197.3963 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 22) G00 X-26.5000 Y-207.5683 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-207.5683 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-207.5683 Z-2.4167 G18 F600 G02 X-26.5000 Y-207.5683 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-207.5683 Z-2.6667 G18 F600 G03 X26.5000 Y-207.5683 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-207.5683 Z-2.9167 G18 F600 G02 X-26.5000 Y-207.5683 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-207.5683 Z-3.1667 G18 F600 G03 X26.5000 Y-207.5683 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-207.5683 Z-3.4167 G18 F600 G02 X-26.5000 Y-207.5683 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-207.5683 Z-3.6667 G18 F600 G03 X26.5000 Y-207.5683 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 23) G00 X-26.5000 Y-217.1693 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-217.1693 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-217.1693 Z-2.4167 G18 F600 G02 X-26.5000 Y-217.1693 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-217.1693 Z-2.6667 G18 F600 G03 X26.5000 Y-217.1693 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-217.1693 Z-2.9167 G18 F600 G02 X-26.5000 Y-217.1693 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-217.1693 Z-3.1667 G18 F600 G03 X26.5000 Y-217.1693 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-217.1693 Z-3.4167 G18 F600 G02 X-26.5000 Y-217.1693 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-217.1693 Z-3.6667 G18 F600 G03 X26.5000 Y-217.1693 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (Fret 24) G00 X-26.5000 Y-226.2313 Z2.0000 G01 F120.0 Z-2.1667 G18 F600 G03 X26.5000 Y-226.2313 Z-2.1667 I26.5000 J0.000 K-181.9833 G01 F120.0 X26.5000 Y-226.2313 Z-2.4167 G18 F600 G02 X-26.5000 Y-226.2313 Z-2.4167 I-26.5000 J0.000 K-181.7333 G01 F120.0 X-26.5000 Y-226.2313 Z-2.6667 G18 F600 G03 X26.5000 Y-226.2313 Z-2.6667 I26.5000 J0.000 K-181.4833 G01 F120.0 X26.5000 Y-226.2313 Z-2.9167 G18 F600 G02 X-26.5000 Y-226.2313 Z-2.9167 I-26.5000 J0.000 K-181.2333 G01 F120.0 X-26.5000 Y-226.2313 Z-3.1667 G18 F600 G03 X26.5000 Y-226.2313 Z-3.1667 I26.5000 J0.000 K-180.9833 G01 F120.0 X26.5000 Y-226.2313 Z-3.4167 G18 F600 G02 X-26.5000 Y-226.2313 Z-3.4167 I-26.5000 J0.000 K-180.7333 G01 F120.0 X-26.5000 Y-226.2313 Z-3.6667 G18 F600 G03 X26.5000 Y-226.2313 Z-3.6667 I26.5000 J0.000 K-180.4833 G00 Z2.0000 (END) (OF PROGRAM)